Concrete Surface Repair Set 10.100.003

Description:

• 2-component surface repair mix
• Consisting of cement and hardener
• Colour grey
• Coverage: 25kg = Approx 4 4m² at 3mm thickness

Properties:

• Self-levelling
• Permanent bond to substrate material starting at a thickness of 3mm
• Dust-free
• Polymer modified, therefore twice as firm as usual concrete
• Wide temperature range
• Very high load capacity
• Easy to coat
• Priming included in set
• Coverage rate 25kg for approx. 4m² at 3mm thickness
• 3mm to 15mm depth
• Curing time 24-36h depending on temperature
• Can be walked on after approximately 6 hours
• Installation temperature of +5°C up to +30°C
• Installation conditions dry and not in direct sunlight
• Processing time after mixing up to 30 minutes

Application:

• For repair of concrete floors with surface defects or for smoothing rough surfaces
• For internal and external areas
• For heavy traffic (e.g. forklift)
• As a dust-free finish or as a smooth surface for subsequent coating

Simple, fast and cost-effective way to a new, high strength and smooth concrete floor.