Menu
Your Cart

Anti Slip Epoxy Floor Paint 11.221.

Anti Slip Epoxy Floor Paint 11.221.
New
Anti Slip Epoxy Floor Paint 11.221.
£140.00
3 or more £91.00
5 or more £89.00
  • Stock: In Stock
  • Model: Anti-Slip Epoxy Paint 11.221.
  • Weight: 13.10kg
  • SKU: 11

Available Options

dmd is ideal for use in areas where a heavy duty, slip resistant flooring is essential such as; Food processing and beverage areas, chemical plant rooms, engineering workshops, automotive & aviation areas, factory units and warehouses. dmd heavy duty anti slip paint is also excellent for all demarcation and walkways.

Description:

  • 3-component epoxy resin system
  • Consisting of epoxy resin and hardener with additional aluminium oxide grit
  • Water-based (solvent-free)
  • Thick high performance anti-slip coating
  • Aluminium oxide grit - fine, medium and coarse
  • Colours: grey , light grey,
  • 5ltr

Properties:

  • Very easy to use, no specialist knowledge required
  • Simple application with a paint roller
  • Followed by addition of aluminium oxide grit
  • Excellent adhesion on concrete, stone and certain asphalt floors
  • Can even be applied on already coated substrates (multiple coating possible)
  • Only one coat needed
  • Slip resistant surface, R11 up to R13 (BGR181) depending on the grit (fine, medium, coarse)
  • Vey high resistance to abrasion
  • Dust-free
  • Impenetrable
  • Odour-free
  • Easy to clean
  • Resistant to oils, fuels and lubricants solvents and cleaning agents
  • Resistant to chemicals - dilute acids, bases, salt and sugar
  • Resistant to most bacteria
  • Improves hardness of concrete floors
  • Application rate 5kg for 15-20m²
  • Can be walked on after approximately 6 hours
  • Load resistant after 24-36 hours depending on temperature and humidity
  • Complete chemical curing time 7 days
  • Installation temperature +10°C to +30°C
  • Installation conditions - substrate must be dry, clean, free of dust and grease
  • Substrate preparation by sanding and priming recommended (see Accessories)
  • For open and porous substrates priming required, see Accessories
  • Fresh concrete must be completely cured
  • Processing time after mixing maximum 30 minutes

Application:

  • All areas where anti-slip safety is essential
  • For heavy duty traffic in commercial and industrial units of all kinds
  • Warehouses with forklift traffic
  • Manufacturing facilities
  • Shops
  • Car repair shops
  • Vehicle halls and multi-story car parks
  • Food industry
  • Diaries, breweries, bakeries, butcher shops and slaughterhouses

Our best high-performance anti-slip floor coating for heavy duty traffic in commercial and industrial areas.

Write a review