Anti Slip Hazard Warning Tape

Anti Slip Tapes and Anti Slip Sheets are designed to make slippery surfaces safer for foot traffic.

Description:

• 60-grit Aluminium-Oxide anti-slip surface
• PVC Grit Carrying Web
• Self-adhesive reverse side with peel-off film for adhesive layer protection
• Pressure-sensitive high performance acrylic adhesive
• Low thickness of less than 1 mm (without release liner)
• Solid product (not laminated)
• Available in rolls and pre-cut strips
• Colours black/yellow striped and red/white striped

Properties:

• Warning colour black/yellow striped for permanent dangers
• Warning colour red/white striped for temporary dangers
• Warning texts for special dangers
• Clear visual surface
• Exceptional slip-prevention rated to R13 according to DIN 51130
• Quick, simple and easy to apply
• No specialist knowledge required
• Strong, long life adhesive keeping the product in place
• Usable on nearly all properly prepared surfaces
• Priming of concrete, cement and wood surfaces is recommended
• high wear resistance (approx.1 Million crossings)
• tear-resistant
• Forklift traffic resistant
• Resistant to most chemicals
• Mineral oil resistant
• UV-stable
• Easy cleaning
• Wide useful temperature range of -20 up to +60 °C
• Installation temperature from +12 °C
• Installation requirements - substrate must be clean and dry
• Can be walked on immediately after installation
• Load bearing after 6-8 h
• Maximum adhesion after 72 h (depending on temperature and humidity)

Applications:

• Permanent, temporary or special danger zones warning
• Prevention of slipping accidents and the resulting costs
• Rectifies smooth, wet substrates or substrates smeared with oil or grease
• For internal and external areas
• For low, medium or high traffic
• Entrances, passages, paths
• Steps, slopes, ramps
• Machines, vehicles
• Kitchen and canteens
• Terraces, shelters

Marking of hazardous areas and slip-proofing using a single product.